Still RCG40 Скачать руководство пользователя страница 55

Страница: 55 / 180

storage. In salty environments, appropriate

protection must be provided.

Loading and unloading the truck

Use an inclined plane or a movable platform to

load and unload the truck. If the truck is not

operational, lift as described below.

DANGER

Use a crane with a suitable lifting capacity for the

weight of the truck, indicated on its data plate. The

lifting operations must be performed by qualified

personnel. DO NOTstand within the crane’s radius

of action or under the raised truck. Use NON MET-

ALLIC slings. Make sure that the lifting capacity of

the slings is suitable for the weight of the truck.

To raise the truck it is necessary to remove

the LPG bottle and associated support.

DANGER

DO NOT SMOKE in the vicinity of the truck when re-

moving the bottle and putting it back.

To remove LPG bottle, proceed as fol-

lows:

–

Open the bottle cover(1) by releasing the

lever locks(2).

–

Close the bottle valve(3).

–

Disconnect the LPG system supply pipe(4)

from the bottle valve or safety valve.

–

Remove the bottle(5).

–

Unscrew the screws(6) and remove the bot-

tle support.



Use and Operation

Truck transport and lifting

60118011601 EN - 09/2020

Содержание RCG40





















































































































































































Результаты поиска

Содержание RCG40

Отзывы:

Похожие инструкции для RCG40

Бренды по названию

Популярные бренды

Still RCG40, Оригинальное руководство пользователя

Результаты поиска

Содержание RCG40

Отзывы:

Похожие инструкции для RCG40

Бренды по названию

Популярные бренды