Still RCG40 Скачать руководство пользователя страница 79

Страница: 79 / 180

DANGER

Only bracket doors or full cabs with closed, sturdy

doors constitute a driver restraint system. PVC

doors (weather protection) are not a restraint sys-

tem!
If the doors are open or have been removed, you

must use an alternative suitable restraint system

(e.g. a seat belt)!

Fastening the seat belt

DANGER

Risk to life when driving without a seat belt!
If the truck tips over or crashes into an obstacle and

the driver is not wearing his seat belt, he can be

hurled out of the truck. The driver could slide under

the truck or collide with an obstacle. There is a risk to

life!

–

Fasten the seat belt before every trip

–

Do not twist the seat belt when fastening it

–

Only use the seat belt to secure one person

–

Have any malfunctions repaired by the STILL

service centre

–

Smoothly pull the seat belt out of the belt

retractor(2) and fasten over the thighs with

a close fit to the body.

NOTE

Sit as far back as possible so that your back is

leaning against the seat backrest. The auto-

matic blocking mechanism permits sufficient

freedom of movement on the seat.

–

Insert the buckle (3)into the seat belt socket

(1).

–

Check the tension of the seat belt. The belt

should fit closely around your body.

Fastening on a steep slope

The automatic blocking mechanism prevents

the belt from being extended whenever the

truck is on a steep gradient. It is no longer

possible to pull the seat belt out of the belt re-

tractor.

–

Move away carefully on the slope.



Use and Operation

Using the truck

60118011601 EN - 09/2020

Содержание RCG40





















































































































































































Результаты поиска

Содержание RCG40

Отзывы:

Похожие инструкции для RCG40

Бренды по названию

Популярные бренды

Still RCG40, Оригинальное руководство пользователя

Результаты поиска

Содержание RCG40

Отзывы:

Похожие инструкции для RCG40

Бренды по названию

Популярные бренды