Still RCG40 Скачать руководство пользователя страница 112

Страница: 112 / 180

Towed load

DANGER

There is an increased risk of accident when using a

trailer.
Using a trailer changes the truck handling character-

istics. When towing, operate the truck such that the

trailer train can be safely driven and braked at all

times. The maximum permissible speed when towing

is 5 km/h.

–

Do not exceed the permissible speed of 5 km/h.

–

Do not couple the truck in front of rail vehicles.

–

The truck must not be used to push any kind of

trolley.

–

It must be possible to drive and brake at all times.

CAUTION

Risk of damage to components!
The maximum towed load for occasional towing is

the rated capacity specified on the nameplate. Over-

loading can lead to component damage on the truck.

The sum of the actual towed load and the actual load

on the fork must not exceed the rated capacity. If the

existing towed load corresponds to the rated capacity

of the truck, no load may be transported on the fork

at the same time. The load can be distributed be-

tween the fork and the trailer.

–

Check the load distribution and adjust it to corre-

spond to the rated capacity.

–

Observe the permissible rigidity value of the tow

coupling.

CAUTION

Risk of damage to components!
The maximum towed load only applies when towing

unbraked trailers on a level surface (maximum devia-

tion +/- 1%) and on firm ground. The towed load

must be reduced if towing on gradients. If necessary,

notify the authorised service centre of the application

conditions. The service centre will provide the re-

quired data.

–

Inform the authorised service centre.

CAUTION

Risk of damage to components!
A support load is not permitted.

–

Do not use trailers with tillers supported by the

tow coupling.

6210_313-001



Use and Operation

Towed load

102

60118011601 EN - 09/2020

Содержание RCG40





















































































































































































Результаты поиска

Содержание RCG40

Отзывы:

Похожие инструкции для RCG40

Бренды по названию

Популярные бренды

Still RCG40, Оригинальное руководство пользователя

Результаты поиска

Содержание RCG40

Отзывы:

Похожие инструкции для RCG40

Бренды по названию

Популярные бренды