Still RCG40 Скачать руководство пользователя страница 39

Страница: 39 / 180

Safety tests

Carrying out regular safety inspec-

tions on the LPG system

Technical safety inspection of the LPG

system

The operating company must commission a

competent person to check the LPG system.

Observe the national regulations in the rele-

vant country! In Germany, check the system in

accordance with § 37 of the employers' liability

association regulations BGV D34 entitled "Ac-

cident prevention regulation for the use of

LPG".

NOTE

Please observe the definition of the following

responsible persons: "operating company"

and "competent person".

The LPG system must be checked:

●

Recurring in regular intervals, but at least

once per year

●

After repair work that may affect operational

safety

●

After changes that may affect operational

safety

●

After breaks in operation of more than one

year.

The following will be checked: proper condi-

tion, the possibility of leakages, function, in-

stallation and the functionality of the safety de-

vices.
The results from the inspection must be recor-

ded in an inspection document in accordance

with BGG 936 (observe the applicable national

regulations). The results must be retained until

the next inspection. The inspection documents

must be available for viewing by the authori-

ties at any time.
The type and scope of tests may differ accord-

ing to the country. Any differing legal provi-

sions in the respective country of operation

must be observed when using trucks with an

LPG system.

Safety

Safety tests

60118011601 EN - 09/2020

Содержание RCG40





















































































































































































Результаты поиска

Содержание RCG40

Отзывы:

Похожие инструкции для RCG40

Бренды по названию

Популярные бренды

Still RCG40, Оригинальное руководство пользователя

Результаты поиска

Содержание RCG40

Отзывы:

Похожие инструкции для RCG40

Бренды по названию

Популярные бренды