Still RCG40 Скачать руководство пользователя страница 21

Страница: 21 / 180

operating company or an authorised represen-

tative, and have been specifically instructed to

drive the truck. Specific knowledge of the truck

to be operated is also required.
The training requirements under §3 of the

Health and Safety at Work Act and §9 of the

plant safety regulations are deemed to have

been satisfied if the driver has been trained in

accordance with BGG (General Employers' Li-

ability Insurance Association Act) 925. Ob-

serve the national regulations for your country.

Driver rights, duties and rules of behav-

iour

The driver must be trained in his rights and

duties.
The driver must be granted the required rights.
The driver must wear protective equipment

(protection suit, safety footwear, safety hel-

met, industrial goggles and gloves) that is ap-

propriate for the conditions, the job and the

load to be lifted. Solid footwear should be

worn to ensure safe driving and braking.
The driver must be familiar with the operating

instructions and have access to them at all

times.

The driver must:

●

have read and understood the operating

manual

●

have familiarised himself with safe opera-

tion of the truck

●

be physically and mentally able to drive the

truck safely

DANGER

The use of drugs, alcohol or medications that affect

reactions impair the ability to drive the truck!
Individuals under the influence of the aforementioned

substances are not permitted to perform work of any

kind on or with the truck.

Prohibition of use by unauthorised per-

sons

The driver is responsible for the truck during

working hours. He must not allow unauthor-

ised persons to operate the truck.
When leaving the truck, the driver must secure

it against unauthorised use, e.g. by pulling out

the key.

Safety

Definition of terms used for responsible persons

60118011601 EN - 09/2020

Содержание RCG40





















































































































































































Результаты поиска

Содержание RCG40

Отзывы:

Похожие инструкции для RCG40

Бренды по названию

Популярные бренды

Still RCG40, Оригинальное руководство пользователя

Результаты поиска

Содержание RCG40

Отзывы:

Похожие инструкции для RCG40

Бренды по названию

Популярные бренды