Still RCG40 Скачать руководство пользователя страница 78

Страница: 78 / 180

Moving the driver’s seat

–

Lift the lever(1)and hold.

–

Push the driver’s seat into the desired posi-

tion.

–

Release the lever.

–

Ensure that the driver’s seat is securely en-

gaged.

Adjusting the seat backrest

Do not put pressure on the seat backrest while

engaging it.

–

Turn the knob(2)clockwise.

–

Move the backrest forwards and backwards

until the driver finds the best sitting position.

–

Release the knob.

Adjusting the seat suspension

NOTE

The driver’s seat can be adjusted to suit the

weight of the individual driver. In order to ach-

ieve the best seat suspension setting, the driv-

er should perform the adjustment whilst sitting

on the seat.

–

Adjust the suspension to your individual

comfort using the adjusting knob (3).

Fastening the seat belt

DANGER

Even when using an approved restraint

system, there is some residual risk that

the driver might be injured if the truck

tips over.
This risk of injury can be reduced

through the combined use of the re-

straint system and the seat belt.
In addition, the seat belt protects against

the consequences of rear-end collisions

and falling off a ramp.

–

We therefore recommend that you al-

so use the seat belt.

Use and Operation

Using the truck

60118011601 EN - 09/2020

Содержание RCG40





















































































































































































Результаты поиска

Содержание RCG40

Отзывы:

Похожие инструкции для RCG40

Бренды по названию

Популярные бренды

Still RCG40, Оригинальное руководство пользователя

Результаты поиска

Содержание RCG40

Отзывы:

Похожие инструкции для RCG40

Бренды по названию

Популярные бренды