Still RCG40 Скачать руководство пользователя страница 22

Страница: 22 / 180

Safety regulations

Safety guidelines

It is essential that operating personnel and re-

pair personnel observe the" rules for the prop-

er use of industrial trucks" enclosed with these

operating instructions.
Examples of those listed are:

●

Operating industrial trucks

●

Driving licence

●

Driveways and working areas

●

Rights, duties and rules of behaviour for the

driver

●

Special operating areas

●

Information regarding setting off, driving

and braking

●

Information for maintenance and repair

●

Regular tests

●

Disposal of greases, oils and batteries

The operating company or the person it has

commissioned must ensure that the driver un-

derstands all safety information and that all

guidelines and safety regulations are ob-

served.
During training, the driver must familiarise

themselves with the following:

●

The operating conditions of the working

areas

●

The specific technical characteristics of the

industrial truck

●

The operation of attachments

Practise driving, control and steering opera-

tions with an unloaded truck until they are

completely mastered. Only then can a loaded

industrial truck be used for practice.

Safety information

DANGER

The industrial truck must not be used by unauthor-

ised persons.
Only trained persons and those authorised for opera-

tion may have access to the industrial truck.

DANGER

Safety systems (e.g. the seat switch) are there for

safety.
Safety systems must never be disabled, regardless

of the kind.

DANGER

Any additional bores or welding to the overhead

guard will compromise its rigidity.
It is therefore strictly prohibited to drill holes in the

overhead guard or to weld to it.

CAUTION

Welding operations on other parts of the vehicle can

cause damage to the electronics.
Therefore, before performing any welding, always

disconnect the battery and all connections to the

electronic control units.

CAUTION

Different functions are supported by gas springs.

Gas springs are under a high internal pressure of up

to 300 bar.
They must only be removed when not under com-

pression and must not be opened without instruc-

tions. Any kind of damage, lateral forces, buckling,

temperatures in excess of 80° C and heavy contami-

nation must be avoided under all circumstances.
Damaged or defective gas springs must be replaced

immediately.
Contact your service partner.

WARNING

In trucks with an accumulator, serious injuries can

occur if the accumulator is not properly handled.
Before starting work on the accumulator it must be

depressurised.
Contact your service partner.

Safety

Safety regulations

60118011601 EN - 09/2020

Содержание RCG40





















































































































































































Результаты поиска

Содержание RCG40

Отзывы:

Похожие инструкции для RCG40

Бренды по названию

Популярные бренды

Still RCG40, Оригинальное руководство пользователя

Результаты поиска

Содержание RCG40

Отзывы:

Похожие инструкции для RCG40

Бренды по названию

Популярные бренды