Still RCG40 Скачать руководство пользователя страница 103

Страница: 103 / 180

–

Position the forks.

–

Set the lift mast to vertical.

–

Lift the fork carriage to the stacking height.

DANGER

Risk of accident due to changed moment of tilt!
If a truck is operated with a forwards tilt (variant) of

more than 3°, there is a greater risk of the load slip-

ping when the load is raised or lowered. The load

centre of gravity and the moment of tilt change when

the load slips. The truck may tip forwards.

–

Only tilt the lift mast forwards with a raised lifting

accessory when it is directly above the stack.

–

When the lift mast is tilted forward, take particular

care to ensure that the truck does not tip forwards

and that the load does not slip.

CAUTION

Component damage possible!
When inserting the fork into the racking, ensure that

the racking and load are not damaged.

–

Insert the fork as far under the load as pos-

sible using the brake Inching pedal. Stop

the truck using the service brake as soon as

the fork back is resting against the load.

The load centre of gravity must be midway

between the fork arms.

6210_800-006



6210_800-007



Use and Operation

Handling loads

60118011601 EN - 09/2020

Содержание RCG40





















































































































































































Результаты поиска

Содержание RCG40

Отзывы:

Похожие инструкции для RCG40

Бренды по названию

Популярные бренды

Still RCG40, Оригинальное руководство пользователя

Результаты поиска

Содержание RCG40

Отзывы:

Похожие инструкции для RCG40

Бренды по названию

Популярные бренды