Still RCG40 Скачать руководство пользователя страница 34

Страница: 34 / 180

Battery acid

WARNING

Battery acid contains dissolved sulphuric

acid. This is toxic.

–

Avoid touching or swallowing the bat-

tery acid at all costs.

–

In case of injury, seek medical advice

immediately.

WARNING

Battery acid contains dissolved sulphuric

acid. This is corrosive.

–

When working with battery acid, use

appropriate PSA (rubber gloves,

apron, protection goggles).

–

When working with battery acid, nev-

er wear a watch or jewellery.

–

Do not allow any acid to get onto

clothing or skin or into the eyes. If this

does happen, rinse immediately with

plenty of clean water.

–

In case of injury, seek medical advice

immediately.

–

Immediately rinse away spilt battery

acid with plenty of water.

–

Follow the statutory regulations.

ENVIRONMENT NOTE

–

Dispose of used battery acid in line with the

applicable regulations.

Disposal of consumables

ENVIRONMENT NOTE

Materials that accumulate during repair, main-

tenance and cleaning must be collected prop-

erly and disposed of in accordance with the

national regulations for the country in which

the truck is being used. Work must only be

carried out in areas designated for the pur-

pose. Care must be taken to minimise any en-

vironmental pollution.

–

Soak up any spilt fluids such as hydraulic

oil, brake fluid or gearbox oil using an oil-

binding agent.

–

Neutralise any spilt battery acid immediate-

ly.

–

Always observe national regulations con-

cerning the disposal of used oil.

Safety

Safety regulations for handling consumables

60118011601 EN - 09/2020

Содержание RCG40





















































































































































































Результаты поиска

Содержание RCG40

Отзывы:

Похожие инструкции для RCG40

Бренды по названию

Популярные бренды

Still RCG40, Оригинальное руководство пользователя

Результаты поиска

Содержание RCG40

Отзывы:

Похожие инструкции для RCG40

Бренды по названию

Популярные бренды