Still R70-40T Скачать руководство пользователя страница 184

Страница: 184 / 288

Operation

Shut-down

– Lubricate the forklift truck.
– Remove LPG cylinder.
– Check the condition and acid density of

the battery and maintain the battery as

specified by the manufacturer; see ⇒ Chap-

ter "Servicing the battery", P. 6-204. (Fol-

low the instructions provided by the bat-

tery manufacturer.) Only store completely

charged batteries.

– Apply a suitable contact spray to all ex-

posed electrical contacts .

– Preserve the engine as specified by the

manufacturer.

CAUTION

Prevent permanent deformation of the tyres.
Jack up the truck so that all wheels are off the

ground.

CAUTION

We do not recommend using a plastic sheet as this

promotes the formation of condensation.
– Cover the truck with a cotton sheet and protect

against dust.

If the truck is to be shut down for even longer

periods, contact your service centre for addi-

tional recommended measures.

Returning to service after storage

If the truck has been in storage for longer than

six months, it must be carefully checked be-

fore being put back into service.
As in the UVV (accident prevention) inspection

or the annual inspection, this check should

also include all safety items for the truck.
– Clean truck thoroughly; see ⇒ Chap-

ter "Cleaning", P. 196.

– Oil joints and controls.
– Check battery condition and acid density;

recharge if necessary.

– Restore engine to normal condition accord-

ing to regulations of engine manufacturer.

174

171673 [EN]

Содержание R70-40T

































































































































































































































































































Результаты поиска

Содержание R70-40T

Отзывы:

Бренды по названию

Популярные бренды

Still R70-40T, Руководство по эксплуатации

Результаты поиска

Содержание R70-40T

Отзывы:

Бренды по названию

Популярные бренды