Still R70-40T Скачать руководство пользователя страница 217

Страница: 217 / 288

Maintenance

Maintenance as required

Maintaining hydraulic equipment

WARNING

Hydraulic oils are hazardous to your health and are

under pressure during operation.
Note safety regulations for working with hydraulic

oils; see ⇒ Chapter "Hydraulic fluid", P. 3-33.

7071_003-072

Check hydraulic oil level

– Position truck horizontally.
– Tilt lift mast forward.
– Lower forks; if there are attachments (spe-

cial equipment), retract the working cylin-

der.

– Switch off the engine.
– Open the bonnet; see ⇒ Chapter "Opening

the bonnet", P. 5-55.

– Disassemble base plate; see ⇒ Chap-

ter "Installing and removing the floor-

plate", P. 6-194.

– Unscrew (1) the dipstick and pull it out.

7094_700-002

– Check oil level. The oil level must be at least

up to the mark (2) on the dipstick.

– If the oil level is not up to the required level,

the hydraulic oil must be topped up ac-

cording to the maintenance data table

(see ⇒ C hapter "Maintenan ce data ta-

ble", P. 6 -186) using the filler neck until

the mark is reached.

– Reinsert (1) the dipstick and tighten it.

Checking hydraulic equipment for leaks

– Check pipe and hose screw connections for

leaks (traces of oil).

Hose lines must replaced if:
• the outer layer is damaged or embrittled

with cracks

• they are leaking
• Unnatural deformations (e.g. bubble forma-

tion or buckling

• fitting is detached from hose
• heavy damage to or corrosion of the fitting

171673 [EN]

207

Содержание R70-40T

































































































































































































































































































Результаты поиска

Содержание R70-40T

Отзывы:

Бренды по названию

Популярные бренды

Still R70-40T, Руководство по эксплуатации

Результаты поиска

Содержание R70-40T

Отзывы:

Бренды по названию

Популярные бренды