Still R70-40T Скачать руководство пользователя страница 74

Страница: 74 / 288

Operation

Checks and operations prior to start-up

WARNING

On some versions (special equip-

ment), the amount of head clearance

on your forklift truck may be restric-

ted.
On these versions, the distance

between the head and the lower

edge of the roofing sheet must be at

least 40 mm.

NOTE

If your truck comes with separate operating in-

structions for the seat, they must be followed.

WARNING

Risk of injury!
To obtain optimum seat cushioning, you must ad-

just the seat suspension to your own body weight.

This helps your back and protects your health.
To prevent injury, make sure that there are no ob-

jects in the swivel area of the seat.

6321_003-044

Moving the driver’s seat

– Pull lever (2) up and move the seat.
– Release the lever.

WARNING

Risk of injury!
– Make sure that the seat is securely engaged.

Adjusting the backrest

– Pull lever (3) upwards and adjust the incline

of the seat backrest using your body weight.

The seat backrest has three detent positions

with an adjustment range of -5° to +5°.
– Release the lever.

WARNING

Risk of injury!
– Make sure that the backrest is engaged.

171673 [EN]

Содержание R70-40T

































































































































































































































































































Результаты поиска

Содержание R70-40T

Отзывы:

Бренды по названию

Популярные бренды

Still R70-40T, Руководство по эксплуатации

Результаты поиска

Содержание R70-40T

Отзывы:

Бренды по названию

Популярные бренды