Still R70-40T Скачать руководство пользователя страница 78

Страница: 78 / 288

Operation

Start-up

CAUTION

Additional information can appear on the display.
– If there are fault displays, please consult the

instructions in the corresponding chapter, see

⇒ Chapter "Error messages", P. 138.

Starting the engine

– Apply the parking brake.

WARNING

Toxicity hazard from exhaust gases.
Do not allow the engine to run in unventilated

rooms.

7071_003-101

– Insert the key (1) into the key switch and

turn it to position "I".

– When the display

STARTEN (START)

lights up, turn the key to position "II" and

hold in this position until the engine starts.

– As soon as the engine has started, release

the key.

– If the engine does not start after 20 seconds,

end the starting operation and start again

after one minute.

171673 [EN]

Содержание R70-40T

































































































































































































































































































Результаты поиска

Содержание R70-40T

Отзывы:

Бренды по названию

Популярные бренды

Still R70-40T, Руководство по эксплуатации

Результаты поиска

Содержание R70-40T

Отзывы:

Бренды по названию

Популярные бренды