Still R70-40T Скачать руководство пользователя страница 65

Страница: 65 / 288

Operation

Checks and operations prior to start-up

– The roller tracks (2) must be lubricated with

a visible lubricant film.

– Check the hydraulic system and hydraulic

oil tank where visible for damage and leaks.

Damaged hoses must be replaced.

– Check the fuel system and fuel tank where

visible for damage and leaks. Damaged

hoses must be replaced.

– The motor hood must be securely closed.
– Steps must be clean and free of ice.
– In the case of versions with a cabin (special

equipment) all windows must be clean and

free of ice. Switch on the heater (special

equipment) and set the air vents so that the

windows remain free of ice.

– Report defects to the supervisor.

7071_003-006

Opening the bonnet

WARNING

Risk of injury!
– Before opening the bonnet, switch off the engine.

– Lock steering column (1) into the frontmost

position.

– Slide the driver’s seat completely forward

and, in trucks with a rear window, fold the

seat backrest (2) forward; see ⇒ Chap-

ter "Adjusting the MSG 65/MSG 75 driver’s

seat", P. 5-60 or ⇒ Chapter "Adjusting the

MSG 20 driver’s seat", P. 5-63.

171673 [EN]

Содержание R70-40T

































































































































































































































































































Результаты поиска

Содержание R70-40T

Отзывы:

Бренды по названию

Популярные бренды

Still R70-40T, Руководство по эксплуатации

Результаты поиска

Содержание R70-40T

Отзывы:

Бренды по названию

Популярные бренды