Still R70-40T Скачать руководство пользователя страница 128

Страница: 128 / 288

Operation

Working with attachments

7081_003-016

Depressurising, multi-lever controls

– Lower fork carriage to the ground, tilt mast

as far back as possible.

– Switch off the key switch.
– Operate all hydraulic operating levers (ar-

rows) multiple times up to their end posi-

tions.

General information on control of

attachments

The control of attachments (option) depends

on the type of attachment.

WARNING

The use of attachments can result in additional ha-

zards such as, for example, a change in the centre

of gravity, additional danger zones, etc.
Attachments may only be used for their intended

purpose as described in the relevant operating

instructions. The driver must be instructed in the

handling of the attachments.
Loads may only be picked up and transported with

attachments if they can be seized and held pro-

perly. If necessary, the loads must also be secured

against sliding, rolling, falling over, swinging or fal-

ling off. Note that the stability of the truck changes

if the load centre distance is changed. Please refer

to the attachment load capacity plate.

NOTE

Further options and functions are possible in

addition to those listed below. The directions

of movement are shown on the pictograms on

the control levers or on the valve cover.

118

171673 [EN]

Содержание R70-40T

































































































































































































































































































Результаты поиска

Содержание R70-40T

Отзывы:

Бренды по названию

Популярные бренды

Still R70-40T, Руководство по эксплуатации

Результаты поиска

Содержание R70-40T

Отзывы:

Бренды по названию

Популярные бренды