Still R70-40T Скачать руководство пользователя страница 123

Страница: 123 / 288

Operation

Working with loads

7090_800-015

7090_800-003

Depositing and retrieving loading

units

– Drive up to the stack with the load lowered

in accordance with operating instructions.

– Place the lift mast in a vertical position.

WARNING

Risk of accident!
If your forklift truck is equipped with greater forward

tilt (special equipment) (over 3°), the load can slip

or the forklift truck can tip over.

– Lift the load to the stack height.

WARNING

Risk of accident!
Tilt the mast forward with raised load-carrying

equipment only when it is directly over the stack.

– Carefully drive the truck forward into the

stack.

– Lower the load until it is resting safety on the

racking.

– Look behind you!
– Back the truck away until you can lower the

fork arms without touching the stack.

– Lower the fork arms to the ground clearance

position.

– Tilt the mast backward and drive away.

WARNING

Risk of accident!
– When retrieving a load, back away until you can

lower the load and fork arms freely.

171673 [EN]

113

Содержание R70-40T

































































































































































































































































































Результаты поиска

Содержание R70-40T

Отзывы:

Бренды по названию

Популярные бренды

Still R70-40T, Руководство по эксплуатации

Результаты поиска

Содержание R70-40T

Отзывы:

Бренды по названию

Популярные бренды