Still R70-40T Скачать руководство пользователя страница 202

Страница: 202 / 288

Maintenance

Safety instructions for maintenance

7071_003-019

Jacking up at the lift mast

– Lift the fork carriage and secure against

accidental lowering.

WARNING

Risk of injury!
Observe the safety regulations for working on lift

masts, see ⇒ Chapter "Working at the front of the

forklift truck", P. 6-192.

– Apply the jack at the mast.
– Jack up the truck until the wheels are no

longer in contact with the ground.

– Secure the truck.

WARNING

Risk of injury!
Do not jack up truck by rear weight.

7081_003-009

Working at the front of the forklift

truck

WARNING

Risk of accident!
If the lift mast or fork carriage is raised, no work

must be performed on the lift mast or at the front

of the forklift truck without observing the following

safety measures!

Removing the lift mast

CAUTION

This work must only be performed by a service tech-

nician.
– Fasten the lifting gear to the upper part of the

bridge piece (2) on the outer mast of the lift mast.

Securing against tilting back

– The lift mast must be secured against unin-

tentionally tilting back by clamping in place

a suitable hardwood timber, dimensions

120 x 120 x 1100 mm. (1).

192

171673 [EN]

Содержание R70-40T

































































































































































































































































































Результаты поиска

Содержание R70-40T

Отзывы:

Бренды по названию

Популярные бренды

Still R70-40T, Руководство по эксплуатации

Результаты поиска

Содержание R70-40T

Отзывы:

Бренды по названию

Популярные бренды