Still R70-40T Скачать руководство пользователя страница 81

Страница: 81 / 288

Operation

Start-up

7311_003-048

Fastening the restraining belt

WARNING

Risk of injury!
– Always fasten the belt before moving the truck.

Make sure that the belt is not twisted when faste-

ning.

– Use the belt only to secure a person!
– If you notice any malfunction in the belt while

fastening, do not put the truck into operation

before the belt has been repaired.

NOTE

The buckle has a buckle switch (special equip-

ment). If there is an operating error or mal-

function, the message

SICHERHEITSGURT

(SAFETY BELT)

appears in the display and

operating unit (see ⇒ Chapter "SAFETY BELT

message", P. 5-142).

– Pull the belt (3) smoothly out of the retrac-

tor and fasten belt tightly against the body

above the thigh.

NOTE

Sit back as far as possible, so that your back is

against the seat backrest. The automatic blo-

cking mechanism permits sufficient freedom

of movement.

– Insert the tongue (2) of the belt into the

buckle (1) until it latches.

– Check the belt tension. It should be close to

the body.

171673 [EN]

Содержание R70-40T

































































































































































































































































































Результаты поиска

Содержание R70-40T

Отзывы:

Бренды по названию

Популярные бренды

Still R70-40T, Руководство по эксплуатации

Результаты поиска

Содержание R70-40T

Отзывы:

Бренды по названию

Популярные бренды