Still R70-40T Скачать руководство пользователя страница 34

Страница: 34 / 288

Safety

Essentials for safe operation

For safety reasons, it is prohibited to drill holes

in the driver’s overhead guard or to perform

welding on it. In the case of welding to other

locations of the forklift truck, the battery and

all connections to the electronic control cards

must be disconnected. Please contact your

service centre.

DANGER

Failure to comply with the above voids the CE con-

formity!
Operation of the forklift truck without the overhead

guard at a lift height of over 1800 mm is prohibited.

Warning regarding non-original parts

Original parts, attachments and accessories

are specially designed for this vehicle. We

specifically draw your attention to the fact that

parts, attachments and accessories supplied

by other companies have not been tested and

approved by us.

CAUTION

Installation and/or use of such products may there-

fore have a negative impact on the design features

of your industrial truck and thus impair active and/or

passive driving safety.
We recommend that you obtain approval from us

and, if necessary, from the responsible regulatory

authorities, before installing such parts. The manuf-

acturer accepts no liability for any damage caused

by the use of non-original parts and accessories

without our approval.

Damage, defects and misuse of

safety devices

The driver must report any damage or other

defects to the truck or attachment immediately

to the supervisory personnel.
Trucks and attachments that are not functional

or safe to drive may not be used until they have

been properly repaired.
Do not remove or deactivate safety devices

and switches.

171673 [EN]

Содержание R70-40T

































































































































































































































































































Результаты поиска

Содержание R70-40T

Отзывы:

Бренды по названию

Популярные бренды

Still R70-40T, Руководство по эксплуатации

Результаты поиска

Содержание R70-40T

Отзывы:

Бренды по названию

Популярные бренды