Still R70-40T Скачать руководство пользователя страница 206

Страница: 206 / 288

Maintenance

Cleaning

7081_003-029

7081_003-030

Cleaning the truck

CAUTION

The engine must be switched off during washing.
– Switch off ignition switch and remove key.

Instructions for washing

– Always park vehicle according to regula-

tions.

– Apply the (2) parking brake.
– Switch off the key switch (1) and remove the

key.

Washing outside of truck

WARNING

Risk of fire!
Do not clean with combustible

liquids.
– Deposits/accumulations of

combustible materials, especially

on or in the vicinity of parts with

high temperatures (e.g. exhaust

pipes) must be removed regularly.

WARNING

If the forklift truck is to be cleaned with hot-water

devices, all sensitive - particularly electric - compo-

nents must be carefully covered.
Note the manufacturer’s guidelines for working with

cleaning agents.

– Clean the vehicle on the outside with water-

soluble cleaning agents and water (water

jet, sponge, cloth).

– Pay particular attention to all walk-in areas,

the oil filling openings and their surround-

ings, as well as the lubricating nipples be-

fore lubricating.

Please note: The more often the truck is

cleaned, the more frequently it must be lu-

bricated.

196

171673 [EN]

Содержание R70-40T

































































































































































































































































































Результаты поиска

Содержание R70-40T

Отзывы:

Бренды по названию

Популярные бренды

Still R70-40T, Руководство по эксплуатации

Результаты поиска

Содержание R70-40T

Отзывы:

Бренды по названию

Популярные бренды