Stihl MS 362 C-Q, Инструкция по эксплуатации

Страница: 6 / 52

MS 362 C-Q
English
4
Use only high quality parts and
accessories in order to avoid the risk of
accidents and damage to the machine.
STIHL recommends the use of STIHL
original tools, guide bars, chains, chain
sprockets and accessories. They are
specifically designed to match the
product and meet your performance
requirements.
Never attempt to modify your power tool
in any way since this may increase the
risk of personal injury. STIHL excludes
all liability for personal injury and
damage to property caused while using
unauthorized attachments.
Do not use a pressure washer to clean
the power tool. The solid jet of water
may damage parts of the power tool.
Clothing and Equipment
Wear proper protective clothing and
equipment.
Avoid clothing that could get caught on
branches or brush or moving parts of the
machine. Do not wear a scarf, necktie or
jewelry. Tie up and confine long hair
(e.g. with a hair net, cap, hard hat, etc.).
Wear safety glasses or a face shield and
hearing protection e.g. earplugs or ear
muffs.
STIHL offers a comprehensive range of
personal protective clothing and
equipment.
Transporting the Chainsaw
Always engage the chain brake and fit
the chain guard (scabbard) before
carrying the saw short distances. Also
stop the engine before carrying the saw
longer distances (more than
about 50 m).
Always carry the saw by the front handle
(handlebar) – with the hot muffler away
from your body – the guide bar must
point to the rear. To avoid serious burn
injuries, avoid touching hot parts of the
machine, especially the surface of the
muffler.
In vehicles: Properly secure your power
tool to prevent turnover, fuel spillage and
damage.
Fueling
Always shut off the engine before
refueling.
Do not fuel a hot engine – fuel may spill
and cause a fire.
Open the fuel cap carefully to allow any
pressure build-up in the tank to release
slowly and avoid fuel spillage.
Fuel your power tool only in well-
ventilated areas. If you spill fuel, wipe
the machine immediately – if fuel gets on
your clothing, change immediately.
Your power tool comes standard with
either a screw-type or bayonet-type fuel
cap.
This reduces the risk of unit vibrations
causing the fuel cap to loosen or come
off and spill quantities of fuel.
Clothing must be sturdy
but allow complete free
-
dom of movement. Wear
snug-fitting clothing with
cut retardant inserts – an
overall and jacket combi -
nation, do not wear a
work coat.
Wear steel-toedsafety
boots with cut retardant
inserts and non-slip
soles.
Wear a safety hard hat
where there is a danger
of head injuries from fall -
ing objects.
Wear heavy-duty gloves.
Gasoline is an extremely
flammable fuel. Keep
clear of naked flames. Do
not spill any fuel – do not
smoke.
After fueling, tighten
down the screw-type fuel
cap as securely as
possible.
Insert the fuel cap with
hinged grip (bayonet-type
cap) correctly in the
opening, turn it clockwise
as far as stop and fold the
grip down.