Applications
RFI-9256 Radio Modem User Manual
Page 54 of 109
In this situation Master 1 must route all SCADA packets that are destined for the slaves connected to the
Master 2 to Slave 2 (the slave radio in the back-to-back repeater). The routing table for Master 1 is shown in
Table 14
Route Type
RTU Address Radio Address
Single Route 21
2000:00
Range Route 40-41
30:00
Table 14: Master 1 routing table
Master 2 must then correctly route all SCADA protocol packets to the slaves in its network. This is done
using the routing table in Table 15
Route Type
RTU Address Radio Address
Mapped Route 40-41
4007:00
Table 15: Master 2 routing table
Slaves 1 must have the following routing table shown in Table 16.
Route Type
RTU Address Radio Address
Default Route N/A
1000:00
Table 16: Slave 1 routing table
Slaves 3 and 4 must have the following routing table shown in Table 17.
Route Type
RTU Address Radio Address
Default Route N/A
30:00
Table 17: Slaves 3 and 4 routing table
