Stephill SSD6000W2, Руководство по эксплуатации

Страница: 18 / 36

SSD6000W2
17
There three standard variants of the Remote Module supplied by Stephill Generators.
Remote Module - ACM725PH - (hours run meter & adjustable run timer)
Remote Module - ACM722PH - (hours run meter &
No adjustable run timer)
Remote Module - ACM722P - ( No hours run meter & No adjustable run timer)
Below is an example of a Remote Module - Fig.14
Fig.14
Remote Module - Overview
Some SSD6000W2 model variants use a Remote Module that is supplied by Stephill Generators Ltd. This
remote module is an extension of the DSE 3110 control module on the generator. In most cases the
generator cannot be operated unless this Remote Module is plugged into the generator.
The Remote Module is used to start and stop the generator. It will also indicate if the engine has shutdown
for High Engine Temperature, Low Oil Pressure and Low Fuel Level (if applicable). A general shutdown
indicator will also show for other generator shutdowns including Low AC Voltage etc. All signals are derived
from the DSE 3110 control module on the generator.
Remote Module Powered (Green)
Engine Running (Green)
Low Oil Pressure (Red)
High Engine Temperature (Red)
General Fault (Red)
Low Fuel (Red)