Stephill SSD6000W2, Руководство по эксплуатации

Страница: 10 / 36

SSD6000W2
9
Do not remove covers and attempt to work on the generator while the engine is running.
Check the rating and electrical safety of the load before connecting the generator.
Equipment should never be connected that in total exceeds the specified rating of the generator.
Stephill generators must not be used in a flammable environment.
Operation of the machine in a saline environment will require additional corrosion protection.
2008 No. 1597 The Supply of Machinery (Safety) Regulations 2008
2016 No. 1091 The Electromagnetic Compatibility Regulations 2016
2012 No. 3032
The electricity produced by an engine driven generator is very similar to mains AC electricity and should be
treated accordingly.
Reference Relative Humidity
General (UK)
Safety Considerations
The generator should always be operated on level ground and be able to bear its weight. Ensure the
generator canopy is not obstructed to allow cool air to enter the set and hot expelled air to escape.
Temperature Range
Reference Barometric Pressure
Saline Environment
Flammable Environment
Operating Environment
Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic
Equipment Regulations 2012
A temperature range between -15 ⁰C and +45⁰C are the normal limits of operation. Operating outside the
range will require additional modifications.
The standard reference condition for relative humidity is 30%. Above this value the rated power must be
reduced.
The standard reference condition for total barometric pressure is 1 bar. This corresponds to an altitude of
approximately 100m. Above 100m the rated power must be reduced.
Auxiliary Power
Installation of the generator as a standby or secondary power source should only be undertaken by a fully
qualified electrician using the appropriate means of isolation from the mains supply. Installation must
comply with all applicable laws, electrical codes and wiring regulations.