Stephill SSD6000W2, Руководство по эксплуатации

Страница: 17 / 36

SSD6000W2
16
Fig.12 show the layout and control buttons of the DSE 3110 control module.
Once the engine is running and all starting timers have expired, the animated icon is displayed.
DSE 3110 Control Module - Overview
Description of Controls
Starting Sequence
Once a start request is made the DSE 3110 will then attempt to crank the engine by operating the starter
motor and fuel relay.
When the engine fires, the starter motor is disengaged. (The DSE 3110 de-energises the starter motor relay
once it detects an output frequency (Hz) from the main alternator).
If the engine fails to fire during this cranking attempt then the starter motor is disengaged for the crank rest
duration after which the next start attempt is made.
Should this sequence continue beyond 3 attempts, the start sequence will be terminated and the LCD screen
will display;
Engine Running
Viewing the Instruments
It is possible to scroll to display the different pages of information by repeatedly operating the navigation
button.
Once selected the page will remain on the LCD display until the user selects a different page or after an
extended period of inactivity, the module will revert to the status display.
Engine Running
Failed to Start
Engine Speed
Generator Volts (AC)
Generator Frequency
Engine Run Time
Battery Volts (DC)
Fig.12
Fig.13
Page Order
Fig.13 above shows the page order when pressing the navigation button.