Stephen Technologies Co.,Limited SVP303 SIP / H.323 ip phone user manual
31
Click UPDATE FIRMWARE, DIGITMAP AND RING, the following interface is
displayed:
1 Update Firmware: Click BROWSE of UPDATE FIRMWARE and select the file name of
the firmware to be updated, and then click UPDATE FIRMWARE. If
the telephone is restarted, update is successful.
2 Update Digitmap: Click BROWSE of UPDATE DIGITMAP and select the file name of
the digitmap to be updated, and then click UPDATE DIGITMAP. If the
telephone is restarted, update is successful.
3 Update Ring: Click BROWSE of UPDATE RING and select the file name of the ring to
be updated, and then click UPDATE RING. If the telephone is restarted,
update is successful.
6. Telnet Setting
Telnet setting is usually operated under command prompt. It’s important that IE setting
cannot be connected to the telephone while Telnet setting is under safe mode. Telnet is
scientific.
6.1 Conditions of Telnet Setting
To set the parameter of telephone with Telnet setting, you need to ensure that the
computer and telephone are in the same LAN and connected. You can test the
connection with the method instructed in section 5.1.
6.2 Open Interface of Telnet Setting
Demonstration of Simply Opening Interface of Telnet Setting opening
Open command window: