Stephen Technologies Co.,Limited SVP303 SIP / H.323 ip phone user manual
21
5.3 Instruction of IE Setting
1 Network Settings
As shown in the above image, there are 8 options for network settings. The setting
depends on distribution modes of IP.
The three IP distribution modes are instructed as follows:
1 Static: When static IP is set, the user needs to set IP address, subnet mask,
gateway IP and Dns address manually.
1
Telephone IP 192.168.0.88 is defaulted.
2
Subnet mask: 255.255.255.0 is defaulted.
3
Gateway IP 192.168.0.1 is defaulted.
4
Dns0 IP 0.0.0.0 is defaulted.
5
Dns1 IP 0.0.0.0 is defaulted.
The above five addresses can be got from administrator or Internet service
provider.
Factory setting is defaulted. The related values should be set according to
operation system and network.
If Phone IP is not among the above default settings, it is the IP address distributed
to dynamic IP by the default setting, dhcp, of Ip Type.
Prompt: Different IP addresses cannot be set for the same segment.
2 DHCP IP address and other network parameters of router dynamic distribution
telephone.
Use dynamic host computer configuration protocol to distribute IP address and
other network parameters
Ip Type factory default setting of the telephone is dynamic distribution. If your