Stephen Technologies Co.,Limited SVP303 SIP / H.323 ip phone user manual
15
There are 7 options:
0[phonenumber] Telephone number is a ID for logging on GK.
Add the registered telephone number to ACCOUNT.
1[account] Use account number to log on GK.
Add the registered account number ACCOUNT.
2[auto] automatic mode
3[md5 account] When H323 protocol used, if GK supports H.235 encryption,
this option can be selected. At the same time, input account and
password in the relevant place.
4[cat account] Cisco Access Talk identification mode; input account and
password respectively.
5[sha1]
6[cnc auth]
13) User Account Input according to register type.
14) User Password Input according to register type.
15 Call Type ADVANCED is defaulted. There are 3 options.
0[normal]
1[faststart] for fast start
2[advanced] use fast start and h245 tunnel
ADVANCED is recommended. You can try other options when calling has
problem.
16 Dtmf CONTROL STRING is defaulted. There are 4 options.
0[control string]
1[inband audio]
2[signal keypad]
3[rfc 2833]
Used to set transmission mode of DTMF signal; the defaulted CONTROL RING
works well mostly. Any other mode is not required except there are some special
requirements.
17 Nat Traversal DISABLE is defaulted.
Search the public IP address of NAT automatically; used for the system that
doesn’t support the telephone whose terminal is behind NAT. At this time, input IP
address of Proxy Server to ADDRESS and set port mapping on NAT to realize
double-direction calling between terminals of the telephone. There are 11 options,
including 9 private protocols.
0[disable]
1[enable]
2[citron]
3[auvtech]
4[stun]
5[vida]
6[aivgr]
7[eproxy]
8[yiyang]
9[txtc]
10[innopath]
