background image

Stephen Technologies Co.,Limited                                                                            SVP303 SIP / H.323 ip phone user manual                                                                                       

 

30

 

     

1 Phone Password:  8888   is defaulted.   

      2 Super Password

888888   is defaulted. 

      3 MAC Address: MAC address of the telephone; (physical address on the network 

card);  48  bits;  hexadecimal  digits;  MAC  address  of  every 
telephone  is  set  by  the  manufacturer  and  can  be  updated 
according to requirements. 

      4 Phone Number   82356919 is defaulted.   
 

6 Save Settings 

      If the following interface is displayed after clicking ENTER to save the settings:   

 

The screen of telephone will display:   

Starting . . . 

It means the parameters are updated successfully. If the homepage of IE setting is 
displayed after clicking CONFIRM, it means the page is updated after a long time of 
operation. Reenter is required. 

 

7 Phone Book 

      After PHONE BOOK is clicked, the flowing list is displayed: 
      1 Serial No.: Serial number of record; from 001 to 100, total 100. 
      2 Name: Recorded name. Capital, lowercase and special characters can be input, 

total 16 characters.   

      3 Telephone Number: Input 16 digits totally. 
 

          The setting record is not effective until SETTING and RESTART are clicked.   
 
8 Update Firmware, Digitmap and Ring 

Содержание SVP303











































Отзывы: