Stephen Technologies Co.,Limited SVP303 SIP / H.323 ip phone user manual
18
5 Repeat number button is used to shift between letter and number.
4 BACKSPACE button is used to delete letter.
6 Press ENTER for confirmation when editing finished.
7 Press REDIAL to return to main menu, and press SAVE and ENTER to save settings.
8 Restart the telephone to finish the setting of phone book.
100 groups of numbers can be saved as most.
4.8 Use Default
Demonstration of Simple Setting Steps:
1 Press ENTER to restore the default setting.
2
Are you sure
is displayed on the screen.
3 Press ENTER for confirmation
4
Restore Success is displayed on the screen.
5 Press REDIAL to return to main menu.
6 Press PAGE DOWN and select Save , and then press ENTER to save setting.
7 Restart the telephone to finish restoring default setting.
The restored default setting is only effective after saved.
4.9 Save
“Are you sure ” is displayed on the screen.
Save the parameter of setting.
The setting is ineffective if this step is not finished
4.10 Exit
IPP BOOT
…
is displayed on the screen. (Restart the telephone)
Exit without saving the setting.
4.11 Entering safe mode
Demonstration of simple setting steps:
1 Press SET button to restart the telephone.
2
Starting
is displayed on the first line on the screen.
Three grids of progress bar are displayed on the second line.
3
IPP BIOS 2.82 is displayed on the second line five seconds later.
4 At this time, the telephone has entered safe mode and its system parameter is
restored as default setting.
(For the parameter information of default setting, please refer to the default
parameter of the relevant setting.)
5) At this time, IP of the telephone is 192.168.0.88
After entering safe mode, the telephone can realize some special operations, for
example:
Input 888888 to IPP BIOS and press ENTER # button , factory setting can
be restored.