38
A100K10805
AlphaCom XE - Installation, Configuration & Operation
Create AlphaNet audio channels
6.2.5
Audio channels must be defined when using a
Static
AlphaNet license.
It is not necessary when a
Dynamic
AlphaNet license is used.
Create VoIP audio channels
In AlphaPro, select the AlphaCom exhange:
Click the
●
Exchange & System
icon
Click
●
Net Audio
Click
●
Insert
Select the destination node and click
●
Select
Enter the parameters as shown
●
Confirm by clicking
●
Ok
Repeat the insert operation for the number of wanted VoIP audio
channels.
The physical numbers 605 to 635 are logical numbers inside
L
AlphaCom XE and are reserved for VoIP AlphaNet and SIP.
Click
●
Close
to close the
AlphaNet Audio Connections
window
Click
●
Close
to close the
Exchange Information
window
Create circuit switched audio channels
Select the AlphaCom exhange
●
Click the
●
Exchange & System
icon
Click
●
Net Audio
Click
●
Insert
Select the destination node and click
●
Select
● Enter the physical numbers in the
Source
and
Destination
nodes as
shown
The module, position and line numbers are automatically defined
●
when the physical number is entered. See the appendix for an
overview of physical numbers in AlphaCom.
Confirm by clicking
●
Ok
Repeat the
●
Insert
procedure for the number of desired audio
channels.
Cluster node programming
6.2.6
Cluster programming is an option for simplifying the programming
and updating of numbers in AlphaNet when operating with integrated
number series.
The exchanges can be given a
Cluster Node Number.
Nodes with the
same Cluster Node Number (1-255) are members of the same cluster.
Mod:
Automatically entered
when the physical
number is defined.
Connect to main Frame:
Module 65 - Master
Module 66 - 1
st
Slave
Module 67 - 2
nd
Slave
Module 68 - 3
rd
Slave
Pos:
Board position number
(1-26)
Line:
Station line on ASLT
board (1-6)
