37
AlphaCom XE - Installation, Configuration & Operation
A100K10805
Configure primary route
Select
●
Data on IP
as
ACDP Link
Select node number for both
●
Data
and
Audio
Tick the
●
Audio on IP
checkbox if a VoIP audio link shall be used
Option: Configure an alternative route
●
The
●
Preferred codec
should be set to
Best Available
Click
●
Ok
AlphaNet link to traditional AlphaCom servers
Select the AlphaCom server
●
Click the
●
Exchange & System
icon
Click
●
Serial Ports
Select a free
●
ACDP Link
(AlphaCom Data Protocol)
Click
●
Change
Tick the
●
Enabled
checkbox to enable the port and select the serial
port for AlphaNet from the
Port Type
drop-down list.
Set
●
Link Type
as
Stentofon Link Layer – AlphaNet
Click
●
Ok
and close the serial port window
Select
●
Net Routing
Click
●
Insert
Select the remote AlphaCom node for the AlphaNet
●
Configure the primary route
●
Select the
●
ACDP Link
that was configured for AlphaNet
Select the
●
Node Number
for both
Data
and
Audio
Do NOT tick the
●
Audio on IP
checkbox
Option: Configure an alternative route
●
Click
●
Ok
For each AlphaCom, it is required to configure AlphaNet links
L
to the AlphaComs that it communicates with.
