Stentofon alphaCom XE Скачать руководство пользователя страница 29

Страница: 29 / 68

AlphaCom XE - Installation, Configuration & Operation

A100K10805

Exchange

● In the main window, select [+] next to the

Select Exchange

pull-

down menu
Proceed as explained in 4.3.1

●

The Node Number applies to AlphaNet nodes

If this exchange is part of an AlphaNet, select Eth1 and enter the IP

●

address.

Data Communication

4.4

In order to establish communication between the PC and the exchange,

the communication program must be started.

During data transfer to the AlphaCom, it is not possible to

modify configuration data in the AlphaCom.

Establishing data communication

4.4.1

● Select the exchange in the Main Window

Click on the

●

Communication

icon

The program will ask you for user name (default:

●

admin

) and

password (default:

alphaadmin

)

The Communication window appears

The connection is confirmed when the communication is

established and the buttons become active.

If the PC is not connected to the exchange, a fault warning will

pop up. You may skip the data transfer until data changes have

been carried out off-line.

Send information to the exchange

4.4.2

● Click

SendAll

to send all data

Click

●

SendChg

to send changed data only

An icon in the lower right corner flashes during transmission.

The transmission may be stopped by clicking

●

Cancel

The

Cancel

key changes to

when the transmission is

completed. Click

Get information from the exchange

4.4.3

● Click

GetAll

to get all data from the exchange

Communication Window Actions

4.5

Send changed data from the PC to the exchange or to all

exchanges in an AlphaNet.

It may take about 60 seconds after the data has been sent for

●

changes to take effect for an exchange in normal operation.
Some changes will require a reset for the changes to take effect.

●

Send all data from the PC to the exchange.

Use this option after major configuration changes or to be sure that

●

Содержание alphaCom XE





































































Результаты поиска

Содержание alphaCom XE

Отзывы:

Stentofon alphaCom XE, Установка, настройка и эксплуатация, Страница: 29 / 68

Результаты поиска

Содержание alphaCom XE

Отзывы: