Stentofon alphaCom XE Скачать руководство пользователя страница 10

Страница: 10 / 68

A100K10805

AlphaCom XE - Installation, Configuration & Operation

2.2.3 Installing the AlphaCom XE20 cabinet

More information is found in Datasheet A100K10800.
The cabinet is intended for mounting in a 19” rack. It has room for

installation of 20 circuit boards in total: one AMC-IP processor board,

one APC program & clock board, and up to 18 feature boards. The

server also includes a mains power supply.

Up to 4 units may be mounted in one 19” rack if sufficient ventilation

●

is provided. It is recommended to mount a 24 VDC cooling fan

module on top of each server unit.
The two-pair star wired intercom cables are connected to connection

●

boards or an LCM Line Connection Module on the cabinet DIN rail or

in a separate distribution field.

● Each subscriber line card provides 6 freely programmable Remote

Control Outputs (RCOs).
Two RJ45 Ethernet terminals on the IP filter board are used for IP

●

LAN and WAN communication.
The serial ports with RS232 and RS422/485 interface are used for

●

connecting to equipment using these protocols.
6 program distribution sources can be connected to the APC

●

board via an optional program connection board or to an LCM Line

Connection Module. Up to 64 extra programs may be added using

AGA boards with 16 programs per board.
The optional program connection board or LCM module has input for 6

●

Remote Control Inputs (RCIs) which can initiate programmed actions.
The server is powered from the mains. The power supply, APWR,

●

runs on 90-270 VAC.

The built-in power supply serves approximately 80 standard stations

when all stations are activated (All Call or Alarm Call). If All Call or

Alarm Call is not to be activated, the server may be fully equipped

with 102 stations.

See the manual

A110K10610 Line Connection Module

for details.

2.2.4 Installing the AlphaCom XE26 cabinet

More information is found in Datasheet A100K10317.
There are three standard cabinet models: 19” rack mounting, floor

cabinet, and floor cabinet with distribution field.
The cabinet has room for installation of 26 circuit boards in total: one

AMC-IP processor board, one APC program & clock board, and up to 24

feature boards. The server also includes a mains power supply and a

cooling fan.

The two-pair star wired intercom cables are connected to connection

●

boards or LCM Line Connection Modules.
There is one Remote Control Output (RCO) per subscriber point on

●

the connection board which can be programmed to perform actions

via an optional relay board.

The LCM module has relay output for 6 RCOs while additional RCOs

require optional relay boards.

● Two RJ45 Ethernet terminals on the IP filter board are used for IP

LAN and WAN communication.
The serial ports with RS232 and RS422/RS485 interfaces are used

●

for connecting to equipment using these protocols.
6 program distribution sources can be connected to the APC

●

board via an optional program connection board or an LCM Line

Connection Module. Up to 64 extra programs may be added using

AGA boards, with 16 programs per board.

RS232
RS232/422/485
USB

Eth1
Eth0

CONNECTION BOARD

123456

MRBD

1 . . . . 6

GND

1...6

RCI

RCO

MAINS

PROGRAM

CONNECTION BOARD

RS232
RS232/422/485
USB

Eth1
Eth0

CONNECTION BOARD

123456

MRBD

1 . . . . 6

1...6

RCO

PROGRAM

CONNECTION BOARD

GND

1...6

RCI

MAINS

Содержание alphaCom XE





































































Результаты поиска

Содержание alphaCom XE

Отзывы:

Похожие инструкции для alphaCom XE

Бренды по названию

Популярные бренды

Stentofon alphaCom XE, Установка, настройка и эксплуатация

Результаты поиска

Содержание alphaCom XE

Отзывы:

Похожие инструкции для alphaCom XE

Бренды по названию

Популярные бренды