Steinberg HALion Sonic 2, Руководство по эксплуатации

Страница: 87 / 820

87
Editing
Editing Insert Effects
Editing Insert Effects
HALion Sonic offers you up to four insert effects for each of the four layers and for the
program itself. The insert effects you assign to a layer affect only that layer. The insert
effects you assign to the program affect all four layers together. Typically, you assign
effects like EQ or Distortion to the separate layers, but effects like Delay or Reverb to
the whole program.
Using the Insert Slots
Each layer and the program have four slots for assigning insert effects. The handling is
the same for all slots and corresponds to the global effects (see
“Using the Insert
Effect Slots” on page 131 ).
Adjusting the Levels
To the right of the insert slots you find faders for adjusting the output levels of the
program and layers.
To adjust the output level, proceed as follows:
• Drag the fader of the program or layer you want to adjust.
• Alternatively, enter a value in the text field below the fader.
Ö
By changing the levels here, the corresponding parameters on the Program page will
change, too. Both parameters are the same.