Steinberg HALion Sonic 2, Руководство по эксплуатации

Страница: 53 / 820

53
Editing
Editing Layers
Additional Parameters for Polyphonic LFOs
The following parameters are only available for the polyphonic LFOs, i. e. LFO1 and
LFO2:
Inv (Invert Envelope)
When the Inv option is activated, the behavior of the LFO envelope is inverted: The
LFO modulation starts at its maximum level and decreases to zero in the time
specified by the Fade In. After the Hold time has elapsed, or when releasing a key, the
modulation increases to its maximum level in the time specified by the Fade Out.
Envelope Mode
Here you can select how the LFO envelope reacts to your playing on the keyboard:
The One Shot modes do not react to note-off events. In addition, you can select
whether the Hold and Fade Out segments act as sustain.
Parameter Description
Delay Delay determines the delay time between the moment you play a
note and the moment the LFO comes into effect.
Fade In Fade In determines the amount of time for the LFO to fade in after
the note has been triggered and the delay time has elapsed.
Hold Hold determines the amount of time the LFO is running before the
Fade Out is carried out.
Use the Envelope Mode “One Shot” or “Hold + Fade Out” to
activate the Hold time. With all other Envelope Modes, the Hold
time is omitted and acts as Sustain.
Fade Out Fade Out determines the amount of time for the LFO to fade out
after the hold time has elapsed or a note has been released.
Use the Envelope Modes “One Shot + Sustain” or “Sustain” to
deactivate the Fade Out. This avoids changes of the modulation
when the note has been released.
Option Description
One Shot Select this mode to play the envelope from start to end in the time
specified by Delay, Fade In, Hold, and Fade Out.
One Shot +
Sustain This mode is similar to One Shot: The Delay and Fade In are always
carried out when you play a note. The Hold and Fade Out are omitted.
Instead, they act as sustain.
Hold + Fade Out When you play a note, the Delay and Fade In are carried out. The
envelope fades out after the time specified by Hold or when releasing
the note. Releasing the note during the Fade In starts the Fade Out
from the current level.
S Fade
Out When you play a note, the Delay and Fade In are carried out. The
Hold acts as sustain. The Fade Out is carried out when releasing the
note. Releasing the note during the Fade In starts the Fade Out from
the current level.
Sustain When you play a note, the Delay and Fade In are carried out. Both,
the Hold and Fade Out act as sustain. Releasing a note during the
Fade In sustains the current level. This avoids a change in modulation
when the note has been released.