Steinberg HALion Sonic 2, Руководство по эксплуатации

Страница: 29 / 820

29
Editing
Editing Layers
Editing Layers
A program contains up to four layers. Each layer can be edited separately. The
available parameters vary depending on the type of the selected layer (sample, synth,
drum, loop, or instrument layer).
To edit a layer, proceed as follows:
1. In the Multi Program Rack, select the program that contains the layer you want to
edit.
2. Click Edit to open the Edit page.
3. Select the Layer Page button of the layer you want to edit, i. e., Layer 1, Layer 2,
Layer 3, or Layer 4.
Depending on the layer type, the corresponding editor (synth, sample, instrument,
drum or loop editor) opens.
Accessing the Parameters of Layers
The layer editor is divided into two sections, displaying the different parameters of the
layer.
To access the parameters of a layer, proceed as follows:
1. Select the layer you want to edit.
2. Click the page button for the parameter (such as Pitch, Filter, Amp, etc.) that you
want to access.
The corresponding subpage opens.
The Voice Subpage
The Voice subpage of the synth and sample layers gives you access to voice settings
of the layer which allows you to control the various Polyphony parameters, Trigger and
Voice modes. You can also configure the Unison feature and set the Glide parameter.
In addition, there is a Key On Delay control to delay the notes you play.