Steinberg HALion Sonic 2, Руководство по эксплуатации

Страница: 171 / 820

171
The Performance Section
The Quick Controls
To set the behavior on the control itself, proceed as follows:
1. Right-click the control on which you want to set the behavior.
2. Select the behavior you want to use from the menu.
To set the behavior on the quick control page, proceed as follows:
1. Go to the quick control page of the respective program or layer.
2. From the list to the left, select the quick control you want to edit.
3. In the Parameter section to the right, click in the Mode pop-up menu and select the
behavior.
Setting the Minimum/Maximum Range
You can set the minimum and maximum range for each assignment separately. This
way, you have much better control over the parameter change.
To set the minimum range on the control itself, proceed as follows:
1. Set the parameter to the minimum value.
2. Right-click the control.
3. Select Set Minimum from the menu.
To set the maximum range on the control itself, proceed as follows:
1. Set the parameter to the maximum value.
2. Right-click the control.
3. Select Set Maximum from the menu.
To set the minimum/maximum range on the quick control page, proceed as follows:
1. Go to the quick control page of the respective program or layer.
2. To the left of the section, select the quick control you want to edit.
3. To the right of the section, use the outer left and right text controls below each
assignment to set the minimum and maximum ranges. Alternatively, you can use
the blue handles on the curve display to the right to edit the minimum and
maximum range graphically.
When setting the minimum/maximum range, the following applies:
• To invert the quick control, for example, so the quick control opens instead of
closing, set the minimum above the maximum value.
• Quick controls in Absolute mode have a control range from 0 % to +100 %.
• Quick controls in Relative mode have an extended control range from -100 % to
+100 %. This is needed to cover the full range of bipolar controls. For example,
you can remotely turn the pan parameter from fully left to fully right by setting the
range from 0 % to +100 %. A setting of 0 % to + 50 % would end at the Center
position in this example.
Option Description
Absolute This remotely controls the parameter values continuously. Parameter
changes will be overwritten.
Relative This remotely controls the parameter values continuously. Parameter
changes can still be heard.
Switch Absolute This will switch between the minimum and maximum value. Parameter
changes will be overwritten.
Switch Relative This will switch between the minimum and maximum value. Parameter
changes can still be heard.