Example Of Confi
MENU
OK
guration (chapter 6.7, page 17) for your convenience. All other parameters should only
own
s
s.
the
.
s under the safety cover lid. By pressing
oll through the submenu items, but no values appear and no
crolling action.
window is activated, and
Pressing OK once again leads to a
window is activated and its
⇒
Confirmation and storage of the new value is done by
S
and the norm
the main menu and the adjustment in the open window is not stored or applicable.
U
g reached this window, it can either be skipped the arrow keys
▲▼
r entering with OK you have
te boost charging with
the arrow keys
possibili
ties for programming:
load on, load off, auto
be changed if you have sufficient information on the battery in use.
With this System-Manager, the user of a photovoltaic solar system has the possibility to design his
unique solar power system. This is made possible by various configuration alternatives for parameter
and functions.
In the following section you will find information on how to change readings, parameters and function
Menu windows clarify possibilities on what to select and give an overview on the menu-driven use of
System-Manager
6.2 Main Menu
Set values and functions can be adjusted with the four control key
any one of these keys, a Main Menu appears in the display – MANU (manual adjustments during
operation), LOGG (inquiry of internal data logger), CONF (configuration of system components) and
PROG (programming set values). By pressing the key below the corresponding abbreviation, you can
enter the corresponding menu.
Other than this Main Menu, the keys always have the normal functions described below to navigate
through menus:
⇒
With the arrow keys
▲▼
you can scr
parameters can be changed by this s
⇒
By pressing OK the displayed menu
the value is indicated.
closure of the window without adjustment.
⇒
After a menu
value is displayed, use the arrow keys
▲▼
to can change the value. When
the maximum value has been
reached, the parameter starts at the
lowest value again. By constantly
pressing the key, the value starts to
scroll in small steps.
pressing OK
⇒
if no selection of another menu is made within 5 seconds after OK is
pressed, the ystem-Manager will automatically exit from all menus
al indication of running status appears .
⇒
If there are no adjustments for 2 minutes on an activated submenu value being changed, the display
indication jumps to
⇒
The MENU key will bring the display back to the Main Menu.
6.3 Menu MAN
Here you have the possibility to directly influence the System-Manager’s behavior
Manual boost charging increases the final charge voltage to set values for a limited
period of time. Havin
or entered by pressing OK. Afte
the possibility to activa
▲▼
.
ties for programming:
on, off
Within this window, the load can manually be connected or disconnected. By pressing
OK you enter this window and you may then switch
στ
from “load on“ to “load off“ or
”auto“. However, the battery will still be protected from the worst discharge by an emergency cut-off that
cannot be overridden by the manual control function. “load off“ switches off all loads and may be used as
main switch if you leave your solar system for a longer period of time. “auto“ automatically protects the
battery from being deep discharged.
possibili
12
Содержание Power Tarom 2070
Страница 28: ......
