A
CP90U
2
1
4
7
8
9
10
11
12
2
3
5
6
13
14
15
16
17
18
3
EN
1. GENERAL SAFETY RULES
GENERAL SAFETY RULES
WARNING!
Read and understand all instruction. Failure to follow all
instructions listed below, may result in electric shock, tire and/or
serious personal injury.
SAVE THESE INSTRUCTION!
1)
Work Area
•
Keep your work area clean and well lit.
Cluttered benches and dark areas
invite accidents.
•
Do not operate power tools in explosive atmospheres such as in the
presence of flammable liquids, gases, or dust.
Power tools create sparks
which may ignite the dust or fumes.
•
Keep bystanders, children, and visitors away while operating a power
tool.
Distraction can cause you to lose control.
2)
Electrical Safety
•
Double insulated tools are equipped with a polarized plug (one blade is
wider than the other) this plug will Qt in a polarized outlet only one way
if the plug does not fit fully in the outlet, reverse the plug and try again,
if it still does not fit, contact a qualified electrician to install a polarized
outlet.
Do not change the plug in any way. Double insulation eliminates the
need for the three wire grounded power cord and grounded power supply system.
•
Avoid body contact with grounded surfaces such as pipes, radiators,
ranges and refrigerators.
There is an increased risk of electric shock if your
body is grounded.
•
Don't expose power tools to rain or wet conditions.
Water entering a power
tool will increase the risk of electric shock.
•
Do not abuse the cord .never use the cord to carry the tools or pull the
plug from an outlet.
Keep cord away from heat oil, sharp edges or
moving parts. Replace damaged cords immediately.
Damaged cords
increase the risk of electric shock.
•
When operating a power tool outside, use an outdoor extension cord
marked "W-A" or "W".
These cord are rated for outdoor use and reduce the
risk of electric shock.
3) Personal Safety
•
Stay alert, watch what you are doing and use common sense when
operating a power tool, do not use tool while tired or under the influence
of drugs alcohol, or attention while operating power tools may result in
serious personal injury.
•
Dress properly. Do not wear loose clothing or jewelry. Contain long hair.
Keep your hair clothing, and gloves away from moving parts.
Loose clothes
jewelry, or long hair can be caught in moving parts.
