84 |
P a g e
OWNER’S
MANUAL
|
STARTRAC 263 4WD
–
8G
–
STAGE
–
V
E.
Lubrication System
E.
Lubrication System
•
Do replace engine oil after first 50hrs. of
operation. Thereafter, engine oil should
be replaced every 250 working hrs.
•
Do not use wrong grade of lubrication oil.
•
Do check oil level daily with tractor parked
on a level ground.
•
Do not overfill engine oil as this can cause
excessive oil consumption and oil leaks.
•
Do replace lubrication oil filter element
every 250 working hrs. after first
replacement at 50 hrs.
•
Do not allow oil to leak. Ensure that the joints
are adequately tight.
•
Do not mix different brands of engine oil.
CLUTCH
•
Do ensure that clutch free pedal play is
between 250 to 30 mm.
•
Do not coast down steep slopes with tractor
in neutral/with clutch pedal pressed
•
Do ensure that the clutch pedal is release
slowly while moving the tractor.
•
Do not work the tractor by slipping and re-
engaging the clutch.
•
Do not rest the foot on the clutch pedal.
TRANSMISSION
•
Do change the transmission oil after 750
hrs. of operation.
•
Do not use top gears with low engine rpm
•
Do operate at optimum speed and correct
gear.
HYDRAULIC SYSTEM & LINKAGE
•
Do ensure that hydraulic control lever is in
down position while draining the
transmission oil.
•
Do not move the operational control range to
fast response, while the tractor is on a hard
surface like concrete, as the implement will
crash down and get damaged.
•
Do
use
matching
trailers
for
transportation. Ensure proper hitching.
Never overload the trailer.
•
Do not attempt to pull or tow anything from
the top link connection. It is dangerous.
•
Do adjust the top link for proper length.
•
Do not use bolts in place of linch pins.
•
Do keep the lower links in lifted position
when the tractor is moving without an
implement mounted on it.
•
Do not reverse the tractor with PTO driven
implement attached and PTO lever in ground
PTO position implement may get damaged in
reverse.
•
Do ensure that the lift arm bolts are
always tight.
•
Do keep the ball joints on top and lower
link clean and dry. Do not lubricate them.
•
Do ensure that implements are raised and
lowered using the control lever.
•
Do ensure that the hydraulic strainer is
cleaned at every schedule.
Содержание 263-4WD-8G-STAGE-V
