StarTrac 263-4WD-8G-STAGE-V, Руководство пользователя

Страница: 47 / 100

47 | P a g e
OWNER’S MANUAL | STARTRAC 263 4WD – 8G – STAGE – V
4.7 STOPPING THE TRACTOR:
1. Reduce the engine speed.
2. Depress the gearshift clutch pedal to disengage drive.
3. Once the tractor has come to a stop, move the gear lever and speed range lever to neutral
position before releasing the gearshift clutch pedal.
4. Use both pedal brakes to stop the tractor and then apply the parking brakes.
5. However, when you release the pedal, the engine returns to the speed set by the hand lever.
6. When using the accelerator pedal, always set the hand throttle lever to the idling position .
4.8 TURNING OFF THE ENGINE
1.
Turn the hand throttle lever to the "idling" position.
2.
Stop the engine by turning the ignition key to the STOP position to disconnect all electrical
circuits.
4.9 OPENING & CLOSING THE BONNET
1.
Firstly, insert the key into the keyhole provided at the
front of bonnet as shown in (fig. 4-2) Rotate it
clockwise direction.
2.
To close the bonnet gently lower the hood down then
press it until lock is engaged.
3.
The tractor is provided with a set of two keys. If lost
contact the authorized dealer to get the lock replaced
4.10 ACCELERATOR PEDAL
The accelerator pedal can override the setting of hand throttle
lever to accelerate the engine. However, when you release the
pedal, the engine returns to the speed set by the hand lever. When
using the accelerator pedal, always set the hand throttle lever to
idling position.
4.11 CLUTCH PEDAL
Pedal released = Drive engaged.
Pedal pressed = Drive disengaged.
Select lower gear as per Load condition and don't override
the clutch for acceleration
Never keep your foot resting on the clutch pedal
when driving
Never coast down slopes with the gear lever in
neutral/clutch Pressed when in gear.
Fig.4.2
Fig.4.3
Fig.4.4