StarTrac 263-4WD-8G-STAGE-V, Руководство пользователя

Страница: 23 / 100

23 | P a g e
OWNER’S MANUAL | STARTRAC 263 4WD – 8G – STAGE – V
2.15 SAFETY FRAME
•
A Safety Structure (ROPS – Roll Over Protection
Structure) and seat with belt are fitted as standard
equipment to the platform tractor at the time of
factory assembly and approved according to the
CURRENT OECD and EEC STANDARDS.
•
The protective structure is formed by three parts, one
upper and two lowers, which are bolted together.
•
The tractor must only be used with the protective
structure in the upright position (Fig. 2.1).
•
If the safety frame was deleted by the original
purchaser or has been removed, it is recommended
that you equip your tractor with a Safety Structure and
a seat belt.
•
Safety frames are effective in reducing injuries during
overturn accidents.
•
A tractor overturning without safety frame can result in serious injury or death.
•
Depending on laws in force in the various markets, a seat with belt may be installed.
•
Always raise the safety frame before installation or use. Always raise the safety frame before
fastening the seat belt.
•
If a fold-down safety frame is installed. DO NOT wear a seat belt when the safety frame is in
folded down position.
•
NEVER keep the safety frame in the folded down position when working with the tractor.
The tractor could tip up if used incorrectly. Protection is only guaranteed when the
protective structure is in its original upright position with the fixing bolts tightened as
described in the assembly instructions.
To Avoid injury! Make sure that certain all parts are installed correctly.
•
Safety belts can be fitted, depending on the laws in force in the various countries of use.
Always wear the safety belts with the protective structure in the upright position.
•
Never wear the safety belts when the protective structure is lowered.
•
If the tractor must pass through low places or be parked there for maintenance purposes
and the top part of the protective structure must be folded at an angle remember that
there is not enough protection for the tractor driver in this position and that he could risk
serious injury.
•
Remember that after use in low places, it is necessary to set the protective structure back in
its upright position (Fig. 2-1) before continuing with any work.
Fig.2.1