StarTrac 263-4WD-8G-STAGE-V, Руководство пользователя

Страница: 62 / 100

62 | P a g e
OWNER’S MANUAL | STARTRAC 263 4WD – 8G – STAGE – V
5.5 SERVING INTERVALS
•
The intervals suggested in the lubrication and maintenance table are indications to use when
the tractor is used in normal conditions.
•
These intervals should be adapted to the real environmental and operational conditions.
•
Serving must be more frequent in adverse work conditions (in the presence of humidity,
mud, sand, very dusty environments).
•
If carried out at the prescribed intervals, the operations described in this section will ensure
that the tractor operates in a regular way.
•
However, remember to carry out the inspections and adjustments (of variable frequency
depending on the environmental conditions and type of work carried out) according to your
discretion and experience.
5.6 MISCELLANEOUS INSPECTIONS
Periodically check the following components. If faults are discovered, contact your Dealer's
specialized personnel and have the damaged parts replaced if necessary:
A. Hand brake lever: make sure that the ratchet locking mechanism is secure and reliable.
B. Make sure that all nuts are well tightened.
C. Make sure that the safety frame bolts are well tightened.
D. Make sure that all other nuts and bolts are well tightened.
5.7 FUEL INJECTION PUMP
•
Only OEM Authorized dealer / your Dealer's specialized personnel may be allowed to work
on the injection pump during the warranty period.
•
Removal of the seals from the pump will relieve the manufacturer from all and every liability
in relation to warranty coverage.
5.8 KEEP THE ENVIRONMENT CLEAN
•
When you need to fill the fuel tank or charge the lubricating oil, never forget to position a
vessel under the component in question in order to collect any fuel or oil that spills out.
•
These products are polluting, so it is very important to protect the environment in this way.
5.9 ENGINE COOLING SYSTEM
•
It is advisable to replace the fluid in the system at least once a year even if you have not
reached 1000 hours service in total.
5.10 RADIATOR
•
To ensure that the cooling circuit operates in a perfect way, it is important to prevent the
radiator fins from becoming clogged.
•
These fins should be cleaned often, even several times a day if the place of work is
particularly dusty.
5.11 LUBRICATION
•
Before lubricating any parts provided with grease nipples, carefully clean the fittings surfaces
and be sure that their seal ball moves freely.
•
After the lubrication, remove any trace of grease to avoid collecting dirt or dust.