StarTrac 263-4WD-8G-STAGE-V, Руководство пользователя

Страница: 51 / 100

51 | P a g e
OWNER’S MANUAL | STARTRAC 263 4WD – 8G – STAGE – V
NOTE :
•
The two schematic drawings do not show any guards on the
telescoping driveline.
•
A guard is mandatory when using telescoping drivelines.
•
Only operating conditions described in the Operator’s Manuals
of the various implements are permitted.
•
This applies particularly to maximum permissible angle of
Articulation, to the use of freewheel clutches and overload
Clutches, and to the prescribed amount of overlap when
Shaped pipes are pushed together.
•
Before using a PTO-driven implement, take action to ensure
that the telescoping driveline is lubricated regularly.
•
Comply with instructions in the Operator's Manual provided by
the manufacturer.
•
On multi-component telescoping drivelines, the yokes at each
end must be aligned as shown.
•
The yokes at each end must NOT be at 90° to one another.
4.19 HAND THROTTLE LEVER
Hand throttle lever mounted on front panel is used in field
application. To increase the speed of engine, pull the lever
towards the driver and to decrease, push it away.
4.20
HYDRAULIC COUPLING DEVICES
Remove the dust cover from coupler (A). When connecting the
hose, ensure that the connectors are perfectly clean.
Connect the trailer's pipe with the QRC’s, operate the DCV lever
respectively to lift trailer.
4.21 POWER STEERING
The tractor is equipped with power steering with a pump of 5.5cc
& steering unit of 50cc which enables the operator for ease in
operation.
The power steering function goes off when the engine is shut off.
Fig.4.12 Align Forks
Correctly
1: Z - Shaped layout
2: W - Shaped layout
Fig.4.13
Fig.4.14
Fig.4.15