StarTrac 263-4WD-8G-STAGE-V, Руководство пользователя

Страница: 70 / 100

70 | P a g e
OWNER’S MANUAL | STARTRAC 263 4WD – 8G – STAGE – V
5.34 IMPORTANT INSTRUCTIONS FOR AIR FILTER
Always stop the engine before ' demounting the filter
elements.
•
Periodically release the clips, remove the cover, take out the
external cartridge and clean it (this operation should be
carried out more frequently if you work in a very dusty
environment.
•
Clean the primary element at first 50 hrs. & then after every
250 hrs. of operation or immediately when the red band
appears on the service indicator.
•
Never remove the secondary element for cleaning. Only
remove when replacement of it is required.
•
Replace primary & secondary element upon 3
rd
cleaning requirement of the primary element
or at 750 hrs. (whichever occurs earlier)
•
Gently pull filter element backwards to remove filter out from housing.
•
Use clean cloth to wipe sealing areas of filter element without removing secondary element .
•
Ensure proper seating of filter into housing before latching the cover. Do not use latches on
the cover to force the filter into air cleaner which could cause damage to housing & will void
warranty.
•
the vacuator valve should always be in perfectly downward direction
CLEAN PRIMARY ELEMENT ON LY BY TAPPING VERTICALLY ONLY ON CLEAN FLOOR. DON’T
TAP DIAGONALLY/ AT AN INCLINED ANGLE.
SECONDARY ELEMENT SHOULD NOT BE CLEANED OR REMOVED DURING CLEANING OF
PRIMARY ELEMENT.
NEVER ATTEMPT TO CLEAN THE FILTER ELEMENT WITH EXHAUST GAS FROM THE ENGINE.
NEVER EVER USE OIL ON DRY FILTER.
NEVER EVER USE OIL, DIESEL FUEL, PARAFFIN OR SOLVENTS TO CLEAN THE FILTER ELEMENT.
5.35 CLEANING OF SUCTION STRAINER
•
At each oil change, thoroughly clean suction strainer by washing
with light oil or kerosene.
•
Failure to observe this will result in extensive shortening life of
hydraulic system.
5.36 STEERING CYLINDER KNUCKLE
•
The steering cylinder knuckle joint nuts (1) checked by an
authorized service center at every service.
Fig.5.24
Fig.5.23
Fig.5.22