– 56 –
REPLACEMENT AND ADJUSTMENT OF PARTS
5.2 MCU PWB
[Disassembly]
Warning:
Turn off the power switch and disconnect the power supply cord from the wall outlet.
Remove the EP toner cartridge and keep it in a safe place.
(1) Remove the following units:
• Rear cover (Refer to section 1.3)
• PWB chassis (Refer to section 5.1)
(2) Disconnect PJ11
[1]
.
To disconnect PJ11, press down on the white, plastic sliding lock
[2]
to unlock it and pull out the harness.
(3) Remove the two screws
[3]
securing the MCU PWB
[4]
to the PWB chassis and remove the MCU PWB.
[Assembly]
Reverse the disassembly procedure.
Caution 1:
Be sure that all the harnesses are firmly connected.
Caution 2:
To install and lock PJ11, insert the harness and push the white, plastic sliding lock upwards until it stops.
Содержание WinType 4000
