Star Micronics WinType 4000, Техническое руководство

Страница: 45 / 180

– 41 –
REPLACEMENT AND ADJUSTMENT OF PARTS
Be sure that the power is disconnected!
(2) Remove the following units:
• Two screws [10]
• Paper guide
[11]
Caution 2: Do not to lose the spring
[12]
that is placed over the screws.
• Screw
[13]
(3) Pull out the heater rod [14] from the heat roller [15] .
Caution 3: Do not touch the glass surface of the heater rod [14] since oil from your hands may damage
it.
[Assembly]
Reverse the disassembly procedure.
Caution: When installing PJ114 [17] , be sure the green ground wire [16] and the diodes are installed correctly. (The
diodes should be installed with the cathode marks in the correct position.)
[10]
[10]
[12]
[12]
[11]
[14]
[15]
[13]
[16]
[17]