Stanley STDR5510, Оригинальное руководство пользователя

Страница: 5 / 36

(Original instructions)
ENGLISH
5
This tool includes some or all of the following features.
1. Variable speed switch
2. Lock-on button
3. Forward/reverse slider
4. Chuck
5. Sleeve
6. Bit Shaft
7. Speed dial
8. Hole (STDR5510)
9. Chuck Key (STDR5510)
ASSEMBLY
WARNING! Before assembly, make sure that the
tool is switched off and unplugged.
Fitting a drill bit or other accessory
Keyless chuck (fig. B1)
• Grasp the rear half of the chuck with one hand and use
your other hand to rotate the front half counterclockwise.
Rotate far enough so that the chuck opens sufficiently to
accept the desired accessory.
• Insert the bit or other accessory into the chuck and tighten
securely by holding the rear half of the chuck and rotating
the front portion in the clockwise direction. When the chuck
is nearly tightened, you will hear a clicking sound. After
4–6 clicks, the chuck is securely tightened around the
accessory.
• To release the accessory, repeat step 1 listed above.
Keyed chuck (fig. B2)
• Open the chuck by turning the sleeve (5) counter
clockwise.
• Insert the bit shaft (6) into the chuck (drill bit not included).
• Insert the chuck key (9) into each hole (8) in the side of the
chuck and turn clockwise until it is tight.
• To release the accessory, repeat step 1 listed above.
• Warning! Do not attempt to tighten drill bits (or any other
accessory) by gripping the front part of the chuck and
turning the tool on. Damage to the chuck and personal
injury may result.
Chuck removal and installation
Keyless chuck (fig. C1)
• Tighten the chuck around the shorter end of a hex key
(not supplied). Using a soft hammer or piece of wood,
strike the longer end in the counterclockwise direction.
This will loosen the chuck so that it can be unscrewed by
hand.
• Screw the chuck on by hand as far as it will go. Tighten
the chuck around the shorter end of a hex key (not
supplied) and strike the longer end in the clockwise
direction with a soft hammer
Keyed chuck (fig. C2)
• Open the chuck as far as possible.
• Remove the chuck retaining screw, located in the chuck,
by turning it clockwise using a screwdriver.
• Tighten the hex key into the chuck and strike it with an
Impact as shown.
• Remove the hex key. Remove the chuck by turning it
counter clockwise.
• To refit the chuck, screw it onto the spindle and secure it
with the chuck retaining screw.
USE
WARNING! Let the tool work at its own pace. Do
not overload.
WARNING! Before drilling into walls, floors or
ceilings, check for the location of wiring and pipes.
Selecting the direction of rotation (fig. D)
For drilling and for tightening screws, use forward (clockwise)
rotation. For loosening screws or removing a jammed drill bit,
use reverse (counterclockwise) rotation.
• To select forward rotation, push the forward/reverse slider
(3) to the left position.
• To select reverse rotation, push the forward/reverse slider
to the right.
Viewed when holding the drill in the operating position. After
any reversing operations, return slider (3) to forward position.
WARNING! Never change the direction of rotation
while the motor is running.
Switching on and off
• To switch the tool on, press the variable speed switch (1).
The tool speed depends on how far you press the switch.
• For continuous operation, press the lock-on button (2) and
release the variable speed switch. This option is available
only at full speed.
• To switch the tool off, release the variable speed switch.
To switch the tool off when in continuous operation, press
the variable speed switch once more and release it.
• Based on the different applications, turn around the speed
dial (7) to control the maximum speed.
Position of date code
The Date Code, which also includes the year of manufacture,
is printed into the housing.
Example:
2017 XX JN
Year of manufacturing
PACKAGE CONTENTS
The package contains:
1 Rotary drill
1 chuck key (STDR5510)
1 Instruction manual
• Check for damage to the tool, parts or accessories which
may have occurred during transport.
• Take the time to thoroughly read and understand this
manual prior to operation.
FEATURES (Fig. A)