Stanley STDC001L, Оригинальное руководство пользователя

Страница: 9 / 62

9
ENGLISH
(Original instructions)
Hints for optimum use
Drilling
• Always apply a light pressure in a straight line with the
drill bit.
• Just before the drill tip breaks through the other side of
the workpiece, decrease pressure on the tool.
• Use a block of wood to back up workpieces that may
splinter.
• Use spade bits when drilling large diameter holes in
wood.
• Use HSS drill bits when drilling in metal.
• Use masonry bits when drilling in soft masonry.
• Use a lubricant when drilling metals other than cast iron
and brass.
• Make an indentation using a centre punch at the centre
of the hole to be drilled in order to improve accuracy.
Screwdriving
• Always use the correct type and size of screwdriver bit.
• If screws are difficult to tighten, try applying a small
amount of washing liquid or soap as a lubricant.
• Always hold the tool and screwdriver bit in a straight line
with the screw.
Maintenance
Your STANLEY tool has been designed to operate over a
long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regular cleaning.
Your charger does not require any maintenance apart from
regular cleaning.
Warning! Before performing any maintenance on the tool,
remove the battery from the tool. Unplug the charger before
cleaning it.
• Regularly clean the ventilation slots in your tool and
charger using a soft brush or dry cloth.
• Regularly clean the motor housing using a damp cloth.
Do not use any abrasive or solvent-based cleaner.
• Regularly open the chuck and tap it to remove any dust
from the interior.
Batteries
Run the battery down completely, then remove it
from the tool.
• NiCd, NiMH and Li-Ion batteries are recyclable. Take
them to any authorised repair agent or a local recycling
station.
Technical data
STDC001L
Voltage V
DC
10.8
No-load speed /min 0-315, 0-1200
Max. torque Nm 27
(PTI Rating)
Chuck capacity
mm 10
Max Drilling capacity
Steel/wood mm 10/25
Weight kg 1.1
Charger
Input Voltage V
AC
220-240
Output Voltage V
DC
10.8
Output Curren(DC) A 2
Approx. charge time min 30
Battery
Voltage V
DC
10.8
Capacity Ah 1.5
Type Li-Ion